As part of their 2023 New Items, Massoth has announced a new version of their popular rail clamps.
According to Massoth, the rail clamp design was updated for two reasons: to make them visually less intrusive (as requested by customers), and to reduce material cost.
The image below shows the new rail clamp on the left, and the old version on the right.
Today, the new rail clamps are available in brass only, other versions (longer clamps, nickel plated clamps) will follow later on.
- 8100111 Rail Clamps, Code 332, Brass, 19mm, 50 pcs – € 59,90
- 8100112 Rail Clamps, Code 332, Brass, 19mm, 100 pcs – € 109,90
Massoth just release their latest newsletter (PDF), with news about the following products:
- 8442090 Manual Shunting Coupler
- 8103045 Flex Track Tensioner – 45 mm Gauge – Code 332, 250, 200
- 8156900 LED control module
Massoth also adjusted their prices. The latest pricelist is available here (PDF).
In their latest newsletter, Massoth announces a new Switching Coupler (Art.No. 8442000), the successor to the popular Automatic Uncoupler (Art.No. 8414002).
The automatic uncoupler (#8414002) was in use for the last nine years. Now it is being replaced by the new Shunting Coupler, which not only looks different, but also differs significantly in operation. It features, among other things, completely revised control electronics with a limit switch and pluggable connection cable, a new type of Uncoupler plate together with running boards and a new coupler hook. The uncoupling plate has a visually appealing checker plate design, which is also used to uncouple the symmetrical coupler.
Manual uncoupling by hand is now also conveniently possible thanks to the two small side running boards. If you don‘t like these running boards, you can simply cut them off with a pair of pliers.
The Switching Coupler is fastened by means of a screw at the place where the hook-and-loop coupler was previously mounted. For LGB and PIKO the appropriate mounting material is included. The Uncoupler is connected to the decoder with the enclosed connection cable (for
the first time, the uncoupler also has its own connection socket). By means of a limit switch, the Uncoupler adjusts itself each time it is put into operation. At the first switching via the hand controller, the motor retracts until the hook reaches the integrated limit switch and switches off. The new shunting coupler is suitable for any commercially available digital decoder. The integrated buffering allows it to work properly even on decoders with insufficient output stabilization.
Production is already running at full speed. The Shunting Coupler is expected to be available in a double pack from September at an MSRP of € 99.00 incl. VAT under item number #8442000. The Shunting Coupler replaces the previously known Automatic Uncoupler #8414002, which is no longer available. All backorders for the Automatic Uncoupler #8414002 will be automatically replaced by the new Shunting Coupler #8442000 at the same price and will be delivered chronologically as soon as available.
Massoth 8442000 Switching Coupler, 2 Pack – MSRP € 99,00